Choose what you allow. The site works fully if you refuse. Cookie policy · Privacy policy

Box semi-trailer (dry van) 13.6 m

2D sketch, side view: Box semi-trailer (closed body)
Side view
2D sketch, top view: Box semi-trailer (closed body)
Top view
Sketch: Box semi-trailer (closed body) · Indicative 2D sketch of the Honexpres library, not a type-approval drawing; the texts in the sketch are in Romanian.

Practical reference values

length
~13.6 m
width
~2.46 m
height
~2.65 m (through the door)
EUR pallets
33 EUR pallets
payload
22 t

The box semi-trailer (dry van) has rigid walls and rear doors. It protects goods from weather and theft better than a curtainsider, but loads only from the rear, at a dock. It has no refrigeration unit: it is not a reefer.

Practical reference values. We confirm the exact dimensions in the quote. Honexpres organises transport with this vehicle, on request.

Request a quote with this vehicle

Check whether your cargo fits

View the 2D vehicle sheets (Romanian)

Values from the type's sheet

Box semi-trailer (closed body)

Indicative Status in the library: Reference

Values from the type's sheet
Parameter Value Kind of value
Internal length 13,620 mm Constructive dimension
Internal width 2,490 mm Constructive dimension
Internal height 2,710 mm Constructive dimension
Number of axles 3 Constructive dimension
Unladen mass, from 5,600 kg Constructive dimension
Technical kingpin load 15,000 kg Technical capacity
Technical axle group load 24,000 kg Technical capacity
EUR pallets 34 Technical capacity
Industrial pallets 26 Technical capacity

The values are published by the manufacturer for the drawn unit or family and entered the Honexpres library on Oct 13, 2026; they have not been re-confirmed at the source. They are not values for calculation and not legal limits.

Indicative values of the class “Box semi-trailer (dry van) 13.6 m”

Usable length
≈ 13.6 m Indicative, of the class
Usable width
≈ 2.46 m Indicative, of the class
Usable height
≈ 2.65 m Indicative, of the class

The class values are indicative and do not describe the drawing above.

Derived values, unverified

Volume
≈ 90 m³ Unverified
EUR pallets
≈ 33 EP Unverified
Industrial pallets
≈ 26 IND Unverified
Loading metres (LDM)
≈ 13.6 ldm Unverified
Reference payload
≈ 22 t Unverified

They are derived or calculated, without a direct source: do not use them as data.

14 configuration data items are still missing for an automatic loading calculation.

Legal limits. Legal limits of dimensions and mass are not properties of a vehicle: they depend on the country, the road and the permit, and are checked along the route. They are not shown here as a universal rule.

Box semi-trailer (closed body)

Indicative Status in the library: In review

2D sketch, side view: Box semi-trailer (closed body)
Side view
2D sketch, top view: Box semi-trailer (closed body)
Top view
Indicative 2D sketch of the Honexpres library, not a type-approval drawing; the texts in the sketch are in Romanian.
Values from the type's sheet
Parameter Value Kind of value
Internal length 13,620 mm Constructive dimension
Internal width 2,480 mm Constructive dimension
Internal height 2,715 mm Constructive dimension
Fifth-wheel height 1,150 mm Constructive dimension
Rear portal height 2,650 mm Constructive dimension
Axle spacing 1,310 · 1,310 mm Constructive dimension
Number of axles 3 Constructive dimension
Unladen mass, base configuration 7,890 kg Constructive dimension
Technical gross mass 39,000 kg Technical capacity
Technical kingpin load 12,000 kg Technical capacity
Technical axle group load 27,000 kg Technical capacity
Technical payload 31,110 kg Technical payload

The values are published by the manufacturer for the drawn unit or family and entered the Honexpres library on Oct 13, 2026; they have not been re-confirmed at the source. They are not values for calculation and not legal limits.

Indicative values of the class “Box semi-trailer (dry van) 13.6 m”

Usable length
≈ 13.6 m Indicative, of the class
Usable width
≈ 2.46 m Indicative, of the class
Usable height
≈ 2.65 m Indicative, of the class

The class values are indicative and do not describe the drawing above.

Derived values, unverified

Volume
≈ 90 m³ Unverified
EUR pallets
≈ 33 EP Unverified
Industrial pallets
≈ 26 IND Unverified
Loading metres (LDM)
≈ 13.6 ldm Unverified
Reference payload
≈ 22 t Unverified

They are derived or calculated, without a direct source: do not use them as data.

9 configuration data items are still missing for an automatic loading calculation.

Legal limits. Legal limits of dimensions and mass are not properties of a vehicle: they depend on the country, the road and the permit, and are checked along the route. They are not shown here as a universal rule.

See the technical sheet (side and top view)

How the pallets fit

Box semi-trailer (dry van) 13.6 m, top view with 33 EUR pallets
Box semi-trailer (dry van) 13.6 m, top view with 34 EUR pallets

Indicative Honexpres drawing generated from the reference dimensions. Not a manufacturer drawing.

How it is loaded

  • rear only (loading dock or forklift)
  • Rear loading only, at a dock or by forklift.
  • No side loading and no crane loading from the top.
  • Can be sealed, with the seal number entered on the CMR.

Suitable for

  • Goods sensitive to theft or weather
  • Parcels and courier freight
  • Packaged electronics and consumer goods
  • cargo sensitive to theft or weather
  • courier / parcels
  • loading at a dock

Not suitable for

  • side loading or loading by crane
  • temperature-controlled cargo

Comparison with related types

Parameter Box semi-trailer (dry van) 13.6 m Mega trailer 13.6 m (3 m internal height)Reefer semi-trailer
Usable length ~13.6 m ~13.6 m~13.3 m
Usable width ~2.46 m ~2.48 m~2.46 m
Usable height ~2.65 m (through the door) ~3.0 m~2.6 m
EUR pallets (120 × 80 cm) 33 EUR pallets 33 EUR pallets33 EUR pallets
Reference payload 22 t 24 t22 t

Detailed specifications

Detailed specifications
Parameter Value Basis Source
Usable length ~13.6 m manufacturer S-KRONE-DRY
Usable width ~2.46 m manufacturer S-KRONE-DRY
Usable height ~2.65 m (through the door) manufacturer S-KRONE-DRY
Volume ~90 m³ Honexpres calculation
EUR pallets (120 × 80 cm) 33 EUR pallets market
Industrial pallets (120 × 100 cm) 26 industrial pallets Honexpres calculation
Loading metres 13.6 LDM market
Reference payload 22 t Honexpres calculation S-DAF-XFC410-FT, S-KRONE-DRY
  • Usable width: 2.48 m internal; 2.46 m between the side guards.
  • Usable height: Internal 2.715 m; the rear door frame of 2.65 m decides.
  • Volume: 13.62 × 2.48 × 2.715 = 91.7 m³.
  • EUR pallets (120 × 80 cm): Market standard; 34 crosswise with no tolerance.
  • Reference payload: 40 − 7.3 − 7.89 (Krone Dry Liner, steel walls) = 24.81 t; minus 2 t.
Representative models (manufacturers and lines)
Krone Dry Liner SDK 27 eLB4.1-STG (steel cassette walls)
Internal length (mm)13,620
Internal width (mm)2,480
Internal height (mm)2,715
Rear door height (mm)2,650
Tare (kg)7,890
Payload technical (kg)31,110

Source: Krone Dry Liner SDK 27 eLB4.1-STG — datasheet · accessed 2026-09-26

Legal limits Requires legal validation

Requires legal validation

  • Maximum combination mass: Maximum mass: 40 t (combination with 5–6 axles)
  • Intermodal transport: 44 t only in intermodal transport (3-axle tractor unit + semi-trailer with 2–3 axles, container up to 45'); in Romania only on category R roads
  • Maximum length: Maximum length: 16.50 m (articulated vehicle)
  • Maximum width: Maximum width: 2.55 m (2.60 m for conditioned bodies)
  • Maximum height: Maximum height: 4.00 m

09 §1.1 (Directive 96/53/EC, Annex I) · 09 §1.4 (OG 43/1997, Annex 2)

Exceptions and limitations
  • Box ≠ insulated ≠ refrigerated: only the refrigerated one has a cooling unit and an ATP class.
  • Box bodies with light walls have a lower tare (~6.5–7 t, UNVERIFIED) → ~23–24 t.
  • No side or top loading.
Sources and verification

Confidence level: medium — A single manufacturer model (Krone); the payload depends a lot on the type of walls.

  1. DAF XFC 410 FT 4x2 Tractor — specification sheet · DAF Trucks UK · accessed 2026-09-26
  2. Directive (EU) 2015/719 · Publications Office UE · accessed 2026-09-23
  3. Directive 96/53/EC, consolidated 14.08.2019 · Publications Office UE · accessed 2026-09-23
  4. Krone Dry Liner SDK 27 eLB4.1-STG — datasheet · Krone · accessed 2026-09-26
  5. OG 43/1997 republished, consolidated 17.09.2026 (hosted by CNAIR) · CNAIR · accessed 2026-09-23

Reference dataset 2026.09.27-1

Box, insulated or reefer: what is the difference?

A box only protects mechanically, an insulated trailer has insulated walls, and a reefer also has a refrigeration unit with an ATP class. For temperature control see the reefer semi-trailer.

Services using this type

Alternatives

How can we help?

About: Box semi-trailer (dry van) 13.6 m

Request a quote

Talk to the team that prepares your quote:

WhatsApp Call +40 756 570 723 We call you Email · contact@honexpres.ro

Get a quote with AI AI